Hyd cylinder on Super C

Anonymous-0

Well-known Member
Is there any way to tap the Hyd system on a Super C to operate a external cylinder? If so does it require a control valve, and how much pressure could be expected..As usual thanks in advance to all who would care to comment.
 
you can add a bypass block
then an open center valve with pressure relief or
a seperate pressure relief
know how to do on a cub somebody elese probably has done on a Super C
Ron
 
It's easier to do on a Super C than a Cub because the space isn't so tight and you don't have to deal with the exhaust pipe.

Purchase the bypass block off ebay from a gentleman in Buffalo.
 
Don't know anything about Super C except that some came from the factory with a Fast Hitch operated with a remote double-acting cylinder. So I am assuming there are probably two ports and a lever to operate the FH. Perhaps your hydraulic system is not set up that way.

And didn't some Super C's have a set of remotes sticking out the back similar to H's and M's. Why not check the on-line parts book to see what is available and what you are missing?

If you can't get no satisfaction, do as the others have said. Go to eBay and buy the bypass manifold. They are always listed.
on line parts book
 
If you don't already have Fast Hitch, find a salvage SC or 200 with F-H and get the valve assy. off of it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top