(800) 853-2651
SHOP NOW

auxillary hydraulic valves on 460

P

Paul Janke

Member
I am putting separate hydraulic valves on a 460 for the loader which is on the tractor. I am using a bank of valves with power beyond so I can go from the pump to the loader valves and from them to the tractor's original valves. The power beyond valves need to have a return to reservoir line. The only place I know of to put that oil back in the system is in with the return line for the power steering. Is there someplace better that I don't know about? Maybe a plug somewhere in the tractor's original valve pack? It has two valves for remotes and the fast hitch on it from the factory.
 
I would look for some other place to return it... increased pressure on the steering return might affect how the PS works. Returning full system flow through that fitting would no doubt increase the return pressure.
 
The rear frame and center section use the same oil as the hydraulics. The suction line for the hydraulics comes from the rear frame. Just put a Tee on the check level plug and pipe into there. The plug is 1/2" NPT and is a foot ahead of the clutch pedal pivot.
 
You must log in or register to reply here.

Similar threads

C
White 2-110 hydraulic valve
Replies
3
Views
146
Antique Acres
A
D
Hydraulic Joystick options
Replies
8
Views
249
DavyH
D
R
Case 585 loader hookup
Replies
6
Views
391
JimB2
J
3
JD 401 B Pressure control valve
Replies
3
Views
171
Jim.ME
J
C
Farmall 300 Hydraulic Valve
Replies
8
Views
324
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top