OT: Canopy at tractor show

Chad504 · Aug 30, 2010

I bought a red 8'x10' canopy to set up at tractor
shows. the center of it has a black plastic cap
that I can drill and put a bolt in. Reason I ask
is I want to make some sort of "flag" with IH
stickers for it. Any ideas?

Janicholson · Aug 30, 2010

innovation is the key.
Put a cheap air hose coupler on the black plastic, then adapt the female end to a 1/8"npt pipe. Extend that pipe 2' and put a flag on it.
To remove for transport, just uncouple and wrap the flag (with dignity) Jim

mkirsch · Aug 30, 2010

Why "make" a flag when you can simply buy one? The flag may be a little expensive but it's a good investment because it looks good and will continue to look good.

If you "make" a flag it will look like someone cut up an old T-shirt and put stickers on it. The stickers will fall off because they're not meant to adhere to something flexible.

Janicholson · Aug 30, 2010

I agree. Jim

Chad504 · Aug 30, 2010

Thanks guys, what I was looking for was the attachment method. the "flag" will be a pair of IH stickers on something rigid until I find a decent IH flag. I'm still up in the air about the whole design. I'm really thinking about a US Flag ( around 18" and a smaller IH flag, flying underneath of course.

OT: Canopy at tractor show

Chad504

Member

Janicholson

Well-known Member

mkirsch

Well-known Member

Janicholson

Well-known Member

Chad504

Member

Similar threads