1086 1st gear

Anonymous-0 · Aug 23, 2010

I seem to have misplaced first gear. I haven"t taken the shifter cover off yet, but is there an adjustment on the lever that is not letting it go all the way into gear??

caterpillar guy · Aug 23, 2010

Yes just try adjusting the linkage fron the cover to the lever.

Owen Aaland · Aug 24, 2010

Might have the nut off the transmission counter shaft. That allows the shaft to move forward and first gear drops off the back end of the splines.

Larry B 1486 · Aug 24, 2010

If it happend all at once loosing first gear in all ranges, most likely nut came off the counter shaft dropping first gear down. Happened to me on my 1486 two years ago. If that is the case, you will have to replace the counter shaft also. My TA was bad also so had it all fixed at the same time. Parts and labor ran me $2,685.00 for it all, transmission fix, TA, front pump, clutch & pressure plate and labor.

1086 1st gear

Anonymous-0

Well-known Member

caterpillar guy

Well-known Member

Owen Aaland

Well-known Member

Larry B 1486

Member

Similar threads