H transmission seal on hydraulic coupling shaft

Anonymous-0 · Aug 19, 2010

I have a major oil leak at the seal on my Super H transmission where it couples to the shaft that drives the belly pump. I have tried to find a diagram on the Case IH parts website that would show how this fits together. I did not find what I need. Can anyone help me figure out how to pull the old seal and replace with new? I hope this is a relatively simple fix. I have changed the seal on the pump itself.

Thanks

Mike

Janicholson · Aug 19, 2010

Easy. The coupling with a slot turns out Lefty loosey (normal threads). Use a square metal bar 2.5' long, that fits the slot. put it in high gear and block the tires in the rear, It will turn very hard. Then it will just come apart easily. Jim

Anonymous-0 · Aug 20, 2010

Thanks for the info. I'll try that.

Mike

H transmission seal on hydraulic coupling shaft

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Anonymous-0

Well-known Member

Similar threads