Correct wrench size needed?

John in Ct · Aug 11, 2010

What is the correct wrench size to do the points in an IH Cub IH distributor and a Farmall H mag? I am thinking 11/32". Also, what is the best to use, open end, angled open end or box? Thanks!

ScottyHOMeY · Aug 11, 2010

Believe 11/32" is it. My own (it's one of those tools I don't lend out, just like my 19/32" and 25/32" sockets) is a combination, and I can say that it's handy to have both the box and the open end. It was part of an a original Craftsman set I bought back in the 70s. If you can't fins a loose one for sale, you can try the miniature sets for sale, but the last set of those I bought a couple of years ago from NAPA, had all manner of very small wrenches, both larger and smaller, but no 11/32"

Dave_Id · Aug 11, 2010

Sears and many other places sell sets of ignition wrenches.. Pick up a set.

evilboweivel · Aug 11, 2010

11/32
good luck
lot of guys are switching to electronic. the Pertronics unit reportly has show 10% hp increase on the cub dyno

Ron
sears

DeltaRed · Aug 11, 2010

Use whatever wrench fits best.try local pawn shop for cheap tools-and single wrenches

Correct wrench size needed?

John in Ct

Member

ScottyHOMeY

Well-known Member

Dave_Id

Well-known Member

evilboweivel

Member

DeltaRed

Well-known Member

Similar threads