# 8 plow

DTK · Aug 8, 2010

Where can you get slats for a # 8 14" moldboard?Also are bushings available for the two arm coulters on this plow? Thanks DTK.

mkirsch · Aug 8, 2010

New parts are not available.

IHCPloughman · Aug 9, 2010

(quoted from post at 01:57:39 08/09/10) Where can you get slats for a # 8 14" moldboard?Also are bushings available for the two arm coulters on this plow? Thanks DTK.

There is a chance those parts are available from your dealer yet. He may have to do some digging though. You'll have to go in armed with part numbers, there were at least 3 different slat bottoms that could have come on a #8.

I got new outer cones for my coulters, it was a few years ago and it seemed like they were close to the last ones left any where. I thought I could use them with my old inner cones (coulter blade hubs) because they looked pretty decent, but when assembled they were as sloppy, maybe sloppier than before. The answer I found was to buy a new bolt, and then shim the inside of the coulter hub with pop cans and thin sheet metal to make the hub snug on the bolt. I know its not right and probably won't last very long, but it works for now.

# 8 plow

DTK

Member

mkirsch

Well-known Member

IHCPloughman

Member

Similar threads