(800) 853-2651
SHOP NOW

H front pedestal

S

Stuart Bruny

New User
I"m replacing the front pedestal and wheel hubs on my 51 H. I"m going to go look at one that is off a 1957 Farmall 350. Can anyone tell me whether it will bolt up to the H and whether there are other differences in appearance, etc. ?? Let me know if you know of a pedestal/wheel hubs for a 51 H in the central Ohio area. Thanks.
 
Only problem could be the rims, a 51 H probably had the rims with 3 loops that bolts go through to install on the wheel. That type rim will fit the 350 wheels. If you happen to have rims with no bolt loops, they won't fit the 350 wheels. Only differences if comparing the same type wheels in appearance, would be wheel castings were made stronger on later wheels, mainly at the rim mounting holes. If comparing notice the casting is thicker there and longer rim mounting bolts were used. If you have the same rims I would bolt it on and not worry because after 1952 or 53 IH only sold the later castings as replacement wheels for any H. Some real late 51 tractors may have come with the thicker wheels. IH used the term for right or left side of tractor as with the operator sitting in the seat. Don't know which way Gordo means.
 
I ended up buying the 350 pedestal and wheel hubs. They were in good shape and matched up well. The wheels were a little thicker where they bolted on, but not so much that I will need longer bolts. Thanks for your help !
 
You likely mean the steering stop bolt ?? On mine, it was the right front bolt as you sit on the tractor. I ended up buying the pedestal and wheel hubs from the Farmall 350.

Thanks for your help.
 
I ended up buying the front pedestal and wheel hubs from the Farmall 350.......it matched up well. Thanks for your help.
 
You must log in or register to reply here.

Similar threads

N
Farmall H Lower pedestal bushing
Replies
1
Views
393
Bob M
Bob M
D
Super M TA front wheel bearing
Replies
5
Views
480
D6joe
D
D
Farmall Super H battery box light bracket
Replies
4
Views
341
caterpillar guy
C
M
MW 9 bolt Hub and 560 6 bolt hub stud/bolt sizes???
Replies
3
Views
351
Lee460
L
C
H Farmall I bought at an auction
Replies
8
Views
795
braol
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top