856 oil leak

IH 856 · Aug 2, 2010

A friend has an oil leak on his 856 around the shaft that engages the parking brake. It is in the plate about in the center and underneath the tractor. What is involved in removing the plate and what type of seal is leaking? Anyone have a drawing of it so I know what I m getting in to?

Anonymous-0 · Aug 2, 2010

look a parts break down. i think web site is something like caseih. maybe some one else knows for sure

Owen Aaland · Aug 2, 2010

(quoted from post at 21:33:34 08/02/10) A friend has an oil leak on his 856 around the shaft that engages the parking brake. It is in the plate about in the center and underneath the tractor. What is involved in removing the plate and what type of seal is leaking? Anyone have a drawing of it so I know what I m getting in to?

I think you are referring to the transmission brake, not the parking brake. The parking brake is located under the range transmission cover, just in front of the seat.

There is an O-ring on the shaft that operates the transmission brake. To replace it you need to drain the transmission oil and remove the bottom cover. There is a clip that holds the transmission brake lever in place and a short pin through the cover into the shaft that holds the shaft in the cover. There is also a woodruff key between the shaft and the brake pad lever. Once the pin, clip and woodruff key are removed the shaft can be withdraw from the cover and the O-ring replaced.

856 oil leak

IH 856

New User

Anonymous-0

Well-known Member

Owen Aaland

Well-known Member

Similar threads