240 IH engine and parts id

How do you tell which engine is in a 240IH , where is the ser # stamped I need to order rings and rod bearing , the sleeves look good . If I have measure
correct the cyl is 3 1/8

thank for the help Steve
 
If you are just getting new rings be sure to measure the thickness so you get the correct set. Rings alone will run around 60 or so.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top