M to H loader

KenB_Texas · Aug 1, 2010

I am looking at a loader to put on my 'H'. It is now on an 'M'. It bolts to the rear axle via the axle clamps. I know the M and H rear axles and front frames are different. My question is are the distances between axle clamp locations the same? I tried measuring mine. The best I could figure they are both about the same at 54" outside.
Does that sound right?

thanks
ken

3500sport · Aug 2, 2010

I have a loader that fits both H's and M's and it was a simple as flipping a bracket around and using different bolt holes, the m is just a few inches wider.

rustyfarmall · Aug 2, 2010

The M is 2 inches wider and 2 inches longer than the H, but the H and the M were designed so mounted implements could be shared between the two with only a few simple changes. If the loader was on an M, it should fit your H.

KenB_Texas · Aug 2, 2010

just as I had suspected ..
Was looking for confirmation before I plunked down the cash...

M to H loader

KenB_Texas

Member

3500sport

Member

rustyfarmall

Well-known Member

KenB_Texas

Member

Similar threads