656D T/A making whining noise

wfd2 · Jul 31, 2010

My 1973 International Utility 656D's T/A is starting to make a whining noise in the "T/A" mode. When I switch it to Direct Drive, the whine goes away. The T/A works perfectly in both T/A and DD, except for the whine.

Does anyone have any ideas as to this noise?

Thanks in advance!
Bill

Allan in NE · Jul 31, 2010

Yep,

That noise is just the gear reduction pinions talking to ya.

Don't worry 'bout it and use it. :>)

Allan

Allan in NE · Jul 31, 2010

Yep,

That noise is just the gear reduction pinions talking to ya.

Don't worry 'bout it and use it. :>)

Allan

wfd2 · Jul 31, 2010

Thanks Allan, I appreciate the help!

Anonymous-0 · Jul 31, 2010

Ran two different 706s when I was a kid. Pull the torque back on one of them turning 2150 RPM in L3 pulling 5 14s in red clay. Whine? Baloney, sounded like a jet turbine reving up.

Owen Aaland · Jul 31, 2010

(quoted from post at 20:32:03 07/31/10) Ran two different 706s when I was a kid. Pull the torque back on one of them turning 2150 RPM in L3 pulling 5 14s in red clay. Whine? Baloney, sounded like a jet turbine reving up.

The 706 has a completely different TA than a 656. The 656 uses a planetary gear set to obtain the speed reduction. The 706 just uses different gear ratios for the low and high sides.

Anonymous-0 · Aug 1, 2010

I did not realize this, learn something new daily, just remember them old gassers really screaming when pulling a plow in heavy soil.

656D T/A making whining noise

wfd2

Member

Allan in NE

Well-known Member

Allan in NE

Well-known Member

wfd2

Member

Anonymous-0

Well-known Member

Owen Aaland

Well-known Member

Anonymous-0

Well-known Member

Similar threads