S/A Farmall Plow

S/C BOB

Member
I m going to a farm auction Fri. and they have a couple of plows I think will work on my tractor would someone please post some pics showing a plow and how it mounts on the tractor. Thanks
 
Ok, I'm going to have to do this with a couple posts 'cause I have not figured out how to post multiple pics yet.
The first three are on a regular A, the second two are on a Super A, with proper brackets both will work on either.
All pics were at RPRU this past June.
a19351.jpg
 
Slight correction to what I have printed below, the Super A in the pics is a Hi Clear, you can tell by the lowering brackets on the reversed hitch, that type of plow mount should work on a regular Super A with just the reversed hitch normally mounted to the final drives.
Hope these help.
 
On the Super AV, you are missing the depth control bar that runs from the right-hand Touch Control arm to the center hole on the reversed drawbar.

Without that depth control, you can't plow. The plow will just drag across the surface and not dig in.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top