Seasonal Disconnect

Wardner · Jul 22, 2010

W-400078.jpg" border="0" alt="Photobucket

</a>

Surprised at how easy this was. It appears the shaft collars are made a few thousandths undersized. As I turned the Allen head screws, I could feel the collar firmly griping the IPTO shaft.

I don't think it will move. This sure beats welding for convenience and future convertability.

Does anyone else think that the previous owner had problems? Shouldn't the dogs be more square? There was silicone gasket maker on the cover joint.

pete 23 · Jul 22, 2010

Looks like a good solution for your situation. I would guess if there was a previous problem the lever mechanism would show a lot of wear from trying to hold it engaged.

Theman · Jul 23, 2010

The fit-up of the two pieces is too good to be wear. You'd see gaps at the corners and tips of the cogs if they had been grinding against one another. The tapered cog design simply makes engagement (a little) easier.

Seasonal Disconnect

Wardner

Well-known Member

pete 23

Well-known Member

Theman

Member

Similar threads