Needing part for Cub

Farmallb · Jul 21, 2010

Im needing to find a GOOD retainer plate made outa pot metal or something like it for the rear main bearing seal. Thanks ahead of time for the help.

Oldiron29 · Jul 22, 2010

Check with TM tractor you can find them on the farmall cub site. oldiron29

BMD · Jul 22, 2010

There is a guy that sells Farmall offset tractor stuff on eBay that might have what you want.
I recently bought a Cub fast hitch from him.
He has has parted out several Cubs lately and when I picked up the hitch he had quite a pile of Cub parts and pieces lying around.Saw at least one engine block.

Just search for Burch_Store on eBay and email him through eBay.

hope that helps
BMD

Jim in Ma. · Jul 22, 2010

I have a bad cub motor I just took apart. If you wish, Send me an e-mail.
The book shows it as a Retainer (crankshaft rear)PN # 251 363 R21 = That's for an early Cub.

Farmallb · Jul 22, 2010

If you have a good retainer, Tell me the worth of it, and ill take it if reasonable. Thanks for replying.

evilboweivel · Jul 22, 2010

you can not get a good seal with the current seals in an old retainer
need to modify it or buy one already done
the one already done is put on a lathe and bored out to except a bigger seal
lot more info on farmallcub.com
Ron

Needing part for Cub

Farmallb

Well-known Member

Oldiron29

Well-known Member

BMD

Member

Jim in Ma.

Well-known Member

Farmallb

Well-known Member

evilboweivel

Member

Similar threads