farmall 560 hydraulic control valves

andi87 · Jul 10, 2010

i need to know the torque value for the four bolts that go thru the three hydraulic control valves.

CNKS · Jul 10, 2010

If I understand you right, those are not stressed parts, just get them snug enough so that they won't get loose. 3/8 inch drive with moderate pressure will do it.

pete 23 · Jul 10, 2010

Twenty to twenty five foot pounds of torque. Excessive torque will cause valves to bind.

andi87 · Jul 10, 2010

i have snugged them up, but have not used a torque wrench yet. i took them apart so i could get a hose off, and put them back together and now i have a major leak between the valves.

MN Scott · Jul 10, 2010

Should be O-rings between the valves. Your going to have to take them apart and replace the o-rings.

farmall 560 hydraulic control valves

andi87

New User

CNKS

Well-known Member

pete 23

Well-known Member

andi87

New User

MN Scott

Well-known Member

Similar threads