Knock in transmission

haymaker421 · Jul 6, 2010

A former Son-in-Law got my CIH 895 Utility in 2 gears at once and let out on the clutch. Now I have a knock in the transmission. Is this something that I can fix. I have an I&T manual and the IHC or Case IH repair books and it looks like it is fairly easy to take off the top cover of the transmission but I have never done it and am more than alittle concerned about getting in way over my head. Or is this something that has to be fixed by taking the transmission apart, splitting the tractor? I am still using the tractor but it is getting worse all the time. It is especially bad in "2" gear. High or low seems to be about the same. I would asppreciate any advice. Thanks.

Mark(EC,IN) · Jul 6, 2010

I'm not expert in there overhaul in that model tractor, but you need to quit using it.

More than likely there is a tooth chipped or gone and it will do a lot more damage if it gets get caught in the gears.

...............Mark

the tractor vet · Jul 6, 2010

You are in for a split ain't noway around that Now as for maybe even a double split Here i am not sure as i have never had one of them apart as there are not to many of them critters around here .

haymaker421 · Jul 8, 2010

Well, thanks for the advice. I was afraid it was something like that.

Knock in transmission

haymaker421

Member

Mark(EC,IN)

New User

the tractor vet

Well-known Member

haymaker421

Member

Similar threads