dual remotes on a h

Anonymous-0 · Jul 6, 2010

can a farmall h be set up with remotes and if so how?
jerry

Anonymous-0 · Jul 6, 2010

Sure. Just add the live hydraulics from a 300 or 350 or from an aftermarket kit before you do.

Zachary Hoyt · Jul 6, 2010

I put a hydraulic coupler on my H on one of the belly pump lines so I could lift the haybine up and down and it has been good. That is just for a one way cylinder, though.
Zach

glennster · Jul 6, 2010

down and dirty way , but the hydraulics will not be live is to use the belly pump, run one of the output lines to a remote valve and take the return line from the valve and use a pipe tee and connect it to the belly pump drain plug. then wire back the control rod so the lift all pump is full on. be sure to use an open center remote spool valve.

TomH in PA · Jul 6, 2010

I have a similar setup, except the coupler is at the end of a short hose that's screwed into the line and hangs over the rear axle.

dual remotes on a h

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Zachary Hoyt

Well-known Member

glennster

Well-known Member

TomH in PA

Well-known Member

Similar threads