(800) 853-2651
SHOP NOW

draw bars for M and H

A

Anonymous-0

Well-known Member
I need to find a drawbar and associated parts to fit my 46 M. will either an M or H drawbar fit and work well and sugestions where to find one.
 
Try Steel Wheel Ranch, they'll probably have either new or used . Easy Bob's Tractor Parts should have new. If you're going to "Historic Farm Days" in Penfield, IL this week Easy Bob will be set up there.

http://www.steelwheelranch.com/

http://www.easybobstractorparts.com/
 
Never tried H to M swap but have 460 drawbar (horseshoe part only) on my M and 460 is supposed to be same size chassis as H.
 

The horse shoe and the axle brackets will interchange from an H to an M although the later Ms used a thicker material. The swinging drawbars will NOT interchange from an H to an M.
 
I use a complete M hitch set up on my H because I pull a heavy pull type beater. Seems I had to tweak the draw-bar in the press a little bit to make it line up underneath the horseshoe. Mark
 
CNKS No offense, I think the C has a different axle (hex) and is not the same. H on up can work, but the H system is thinner of material both in the "U" and the drawbar as well. The pivot pins are also different as are the cast pivot mounting bracket. Jim
 
Due to the hex shaped axle housings, the C requires different axle clamps. The axle clamps are used with multiple equipment. But given the right clamps, the drawbars from the larger tractors will bolt right on (as will the drawbar from an F-12).
 
You must log in or register to reply here.

Similar threads

K
farmall parts & diagrams Farmall H Steering source
Replies
2
Views
172
Janicholson
Janicholson
G
C264 SUPER M BLOCK
Replies
7
Views
534
caterpillar guy
C
D
Sprayer for Super A
Replies
6
Views
276
Turkeyfoot
Turkeyfoot
D
Different H hoods?
Replies
4
Views
307
redforlife
R
Janicholson
Re: Another M hydraulic question
Replies
2
Views
154
fastfarmall
F
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top