Farmall C question

kennell · Jul 4, 2010

My C leaks from the shaft that the brake and clutch pedals attach to. I want to put new seals but parts book does not show seals for the shaft. What do i do to stop the rear end from leaking out aroumd this shaft? Thanks Kent

Tom Fleming · Jul 4, 2010

8 2 360076R92 SEAL OIL SEAL, brake pedal shaft

Part #8, on the diagram.

2 required. part # 360076r92

Here is the link:

https://webparts.pvassociates.net/cnh/webparts/main.php

search farmall c, chassis, read frame.

Brian Schmidt · Jul 4, 2010

This is 2 per side. The new ones are thin and old ones are real thick. I have tried 1 per side and they usually leak. Also, you will want to drain the rearend when you change these as you may have figured.

kennell · Jul 5, 2010

Thanks Guys. I'll see about ordering them today. I have the cover off the rear end and the fluid drained.

Tom Fleming · Jul 5, 2010

Looks like the Napa part number is: NOS 11170

I just replaced the seals on my H with NAPA replacements. The old ones were double ( on the PTO and brake drums). I used single ones and have been satisfied. On the brake and clutch shaft, they were only singles. I would start with a single seal, and give a try. It would be relatively easy to add a 2nd seal if that doesn't work, but I am not sure if the shoulder cut in the rear chassis housing is deep enough to take 2 seals.

Farmall C question

kennell

Member

Tom Fleming

Well-known Member

Brian Schmidt

Member

kennell

Member

Tom Fleming

Well-known Member

Similar threads