400 leaky rear hydraulic coupler tubing

Don Hopf · Jun 30, 2010

The rear hydraulic coupler metal tubing that runs by the battery box is leaking.

Is there a way to replace the tubing with rubber hose from the control valve to the back of the tractor?

Thanks

Don

Wardner · Jun 30, 2010

Why go to the trouble and expense? Replace with this eBay item.

http://cgi.ebay.com/Farmall-450-gas...pt=LH_DefaultDomain_0&hash=item5193bb023f

pete 23 · Jun 30, 2010

You can get a fitting crimped onto a hose that has compression fitting that will slip on the good portion of the pipe, or you can go directly with threaded elbows into back of hyd valve and hose all the way but that is not so easy or like poster said, go on e-bay.

Roger46 · Jul 1, 2010

There is the same problem with the 300/350 and 400/450 lines going to the rear coupler. They sat on the platform in mud and wet and rusted away. I tried four of them for my 350D and finally gave up and welded the holes shut on the best one I had. If I were using this tractor for any kind of work I would probably replace the lines with hoses. Roger

400 leaky rear hydraulic coupler tubing

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

Don Hopf

Member

Wardner

Well-known Member

pete 23

Well-known Member

Roger46

Member

Similar threads