806 hydraulics

jdetig1 · Jun 23, 2010

my 806 only has one hydraulic outlet what is the best way to add another outlet, add another factory valve or get a hydraulic multiplier? is there any manual hydraulic multiplier valves or are they all electronic because the electronic ones are kind of expensive.

the tractor vet · Jun 23, 2010

Add a second factor one . Ya need the one that is open faced both sides and the lever .

jdetig1 · Jun 24, 2010

i thought i needed the one that is open on one side and closed on the other side to bolt onto the outside of the one i already have.

Owen Aaland · Jun 24, 2010

(quoted from post at 17:38:51 06/24/10) i thought i needed the one that is open on one side and closed on the other side to bolt onto the outside of the one i already have.

Most likely the one you have is open on only one side. A second valve would go between the one you now have and the piece that it is bolted to. If you would happen to have a valve that is open on both sides and uses a cover plate on the left side, then you can use either style for a second valve.

jdetig1 · Jun 25, 2010

ok that makes sense, do you know where i can get a second valve?

806 hydraulics

jdetig1

Member

the tractor vet

Well-known Member

jdetig1

Member

Owen Aaland

Well-known Member

jdetig1

Member

Similar threads