656 IH

Chris Doe · Jun 14, 2010

I had the injector pump rebuilt, i put it in and it wont start, the glow plugs are working but just wont start, What do i do!

Anonymous-0 · Jun 14, 2010

Well-------- Is the shaft seal in correctly? Its easy to fold over or damage. Is the shaft timed to the pump correctly? Could be lots of things. Make sure the return is clear and flows.

the tractor vet · Jun 14, 2010

Ya got her out of time pull it back apart line up the little lines in the timing window of the pump then look in the end of the pump and look for the DOT then look at the shaft and there will be a DOT on the end of it and then ya make the two DOTs line up , just becareful not to roll the cup seal when your going together or you will have fuel in the pan and asking how to fix that .

DeltaRed · Jun 14, 2010

did you line up timing marks at the flywheel AND the pump before you removed the pump?

Allan in NE · Jun 15, 2010

Did you prime it?

Allan

Chris Doe · Jun 15, 2010

its all lined up, we even have fuel cumming out the return line but not to the injectors! now what do i do?
Thanks
Chris

656 IH

Chris Doe

New User

Anonymous-0

Well-known Member

the tractor vet

Well-known Member

DeltaRed

Well-known Member

Allan in NE

Well-known Member

Chris Doe

New User

Similar threads