Changing IH766 Hydraulic oil

za766 · Jun 14, 2010

I know there are numerous places to drain the hydraulic oil from the 766 to be sure to get it all drained and replaced. Could someone tell me each of the areas to drain as I know I have condensation in my current and will replace tonight as I have filter and oil. Thanks for all your help.

Allan in NE · Jun 14, 2010

I just yank the belly plug above the drawbar and change out the filter.

At 20-some gallons, the new oil is gonna suspend what little moisture that is still in there.

Allan

Allan in NE · Jun 14, 2010

I just yank the belly plug above the drawbar and change out the filter.

At 20-some gallons, the new oil is gonna suspend what little moisture that is still in there.

Allan

Anonymous-0 · Jun 14, 2010

Jerk the draw bar out get 1 right in center of rear end housing 1 (3/4),While under there get (2) 1/2 1 from each final drive housing,(THEY ARE GOING TO BE TIGHT).

Now go up under TA and transmission get 2 there (1)1/2,And (1) 3/4 and at that you won't get Ever little bit of oil.

Changing IH766 Hydraulic oil

za766

Member

Allan in NE

Well-known Member

Allan in NE

Well-known Member

Anonymous-0

Well-known Member

Similar threads