hydr.

Michael/Cindy · Jun 5, 2010

We just brought home our H

and it has a bucket on it we want to remove it so we can start to fix H up. Question is once hydr. are off what do I do on the tractor plug the pressure hole or what I don"t want to burn up a pump. I hope someone can help me out.

Zachary Hoyt · Jun 5, 2010

If you have a belly pump set up with the push/pull rod all you have to do is put the rod in the neutral position and it will be fine so long as there is oil in the pump. If you have auxiliary valves on your hydraulics the easiest thing might be to remove the belly pump driveshaft on the back of the pump. It is about 4" long as I recall and has a collar on each end. Pull out the cotter pins and slide the collars back on the shaft and it will slip right out. Then you don't have to worry about it. If you have something other than a belly pump someone else'll have to tell you what to do.
Zach

hydr.

Michael/Cindy

New User

Zachary Hoyt

Well-known Member

Similar threads