560 farmall hydraulics

460anger

Member
Took the 2 point hitch off and put a 3 point hitch on, but now the customer does not want down pressure. Can I hook into any of these outlets for one way action or will I need to run a hose up to the outlets under the gas tank? This had the hydra touch control. Under the dash, I only see 2 controls to change from one way to 2 way. One is capped off. This tractor does have the 3 handles. I posted a picture. The two holes that are open were the ones used on the 2 point.
a16541.jpg
 
Nope you can not make the tela depth system work signal acting and the operation of that valve is contro;ed by the linkage from the fast hitch to the valve and it must move with the movment of the hitch in relationship to the control valve to place the system off demand . As for giving up a fast hitch for one of them after market three points there is no way i would do it . So if ya want to make this night mare work then you are going to have to go find a 460-560 that came from the factory with no fast hitch and has the three valves Then you can .
 
I did not think I could hook it up there. But i no I can use one of the ones under the fuel tank. Just have to use a little more hose and turn the valve control to single acting. No big deal Thanks
 
Oh NO BIG DEAL YOU SAY , well unless you can get the hydra touch control valve to center the the hyd. system will be under load . OH a d God help ya if the pressure regulator ever sticks . Only seen one and the results was not pretty .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top