moldboard

Paul G. in Mn · May 24, 2010

we picked up a 2 point 2-14 plow and the moldboards are bad. I have a number of "IH 03046 SCO" Is that moldboard used on other plows? Were not going to do alot of plowing with it, maybe just 1 day a year. One of the ones on it is cracked pretty bad. Thanks Paul

Janicholson · May 24, 2010

You will be shocked at the price if you find them. A picture might also help the experts. A good welder with nickle rod could repair the crack to a serviceable condition. Jim

DeltaRed · May 24, 2010

I had one that was broken in half.ground mating surfaces to a V,stitched alternatingbeads with 6011.while stillhot'filled in wiyh 7018 let cool naturaly.ground down'work side'smooth.5 yearsand 500+acres still plowing

mkirsch · May 25, 2010

The only moldboards available new are the Super Chief style. Those will run you about $100 each.

Anything else, you're out of luck with new parts.

Without a picture I can't be sure but I'm betting that you've got the old two-piece bottoms with the quick-change shares.

All you can do there is look for another parts plow with decent moldboards if you want to stay with the original style bottoms.

You can also replace the entire bottom assembly with the newer Super Chief style. Again, a parts plow with decent wear parts would be your best bet.

ryanwheelock · May 25, 2010

I 2nd the welding repair. I've welded a few moldboards over the years and still using them every spring.
Ryan

PaulGinMn · May 25, 2010

thanks guys, Im going to try haveing it welded.

moldboard

Paul G. in Mn

Member

Janicholson

Well-known Member

DeltaRed

Well-known Member

mkirsch

Well-known Member

ryanwheelock

Member

PaulGinMn

Member

Similar threads