M wiring

Oldiron29 · May 18, 2010

On Bobs Melviles wiring diagram I have #3 but my voltage reg is frame mounted. Should I have F on generator connected to F on voltage reg?
Thanks oldiron29

gene bender · May 18, 2010

Yes the F terminals should be connected together always with a gen and reg.

Oldiron29 · May 18, 2010

Thanks Gene

Janicholson · May 19, 2010

Also be sure it (regulator body) is well grounded to its mount! Jim

Oldiron29 · May 19, 2010

Follow up, I rechecked all wiring I had done and put omi meter on all checking ground. I did get the generator to motor run as it should. And when tractor was running high RPM it was CHARGING 10AMP Yip YIP HRA. In doing this I also had a cub cadet 107 that was my dads he gave up on it would not charge It had fryed wiring. Well I rewired most of if and put in new ingnition key switch and now Its a charging.
I never did well with electrical trouble shooting on tractor and autos. Could deal with mags there easy but push bottom start and lights did me in. Bin doin alot of reading Thanks to Bob M diagrames and John T trouble shoot and test I now know much more than I did!! thanks Also to Gene and Jim and all the guys on this forum. Oldiron29

M wiring

Oldiron29

Well-known Member

gene bender

Well-known Member

Oldiron29

Well-known Member

Janicholson

Well-known Member

Oldiron29

Well-known Member

Similar threads