(800) 853-2651
SHOP NOW

farmall h carb

P

partsman64

New User
I have a h carb with a tag #45108DB with a broken casting, have been looking for a used carb but cant find a carb with that number. What other casting #'s will work?
 
Tha number was an IHC D-10 carburetor used for kerosene engines.
The IHC D-10 carburetor for the gas H was 50981DA.
 
I have a good top half of an H carburetor listed on my website, but I'm guessing it is the bottom half that you need. It makes no difference what number is on the tag because the parts will all interchange.
 

6272 DB is a part number for either the top half or for the bottom half and has nothing to do with the model number which is stamped on the brass tag. Like I said before, the H carburetors will all interchange. It is only the internal parts that are slightly different, and those parts will interchange also.
 
I had exactly the same question; the leak is from the idle adjustment screw that points downward under the bowl. I'm hoping (and asking) if a repair kit is all I need? I'm guessing the seal may be bad, but I'm not sure the idle adjustment actually comes out and can be replaced. Thanks for clearing up the 6272DB issue. I'll look for the actual tag, probably painted over.
 
(quoted from post at 07:41:51 05/15/10) I had exactly the same question; the leak is from the idle adjustment screw that points downward under the bowl. I'm hoping (and asking) if a repair kit is all I need? I'm guessing the seal may be bad, but I'm not sure the idle adjustment actually comes out and can be replaced. Thanks for clearing up the 6272DB issue. I'll look for the actual tag, probably painted over.
Click to expand...

There is a "packing" inside there. You can try to tighten the packing nut, as already suggested, but if that does not work, you will have to replace the packing. Also, the area where that screw is located is the most common place for the casting to crack, so look it over good and make sure it is not cracked.

A GOOD carburetor repair kit DOES include the new packing, but there are also many kits available for sale that DO NOT include that packing.
 
You must log in or register to reply here.

Similar threads

D
Farmall carburetor.
Replies
4
Views
373
used red MN
U
T
Stumped on M Tuning
Replies
14
Views
637
560Dennis
560Dennis
1
Help IDa tractor I bought
Replies
14
Views
667
used red MN
U
F
310 backhoe need carb help
Replies
4
Views
180
Joe (Wa)
J
M
More on grandson's Cub project
Replies
2
Views
227
Mike(NEOhio)
M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top