h-hyd.question

joemama · May 15, 2010

Ido have a lift plow on the front,but would like to know if i can run another line off my pump,there apears to be 2 more outs on the belly pump for a fork or bucket to make the fork or bucket roll out at the end

mkirsch · May 15, 2010

Stock hydraulics can only control one function, so you can either lift the plow OR roll the bucket.

You need to install a two-spool auxiliary hydraulic valve to control two functions.

rustyfarmall · May 15, 2010

Those outlets are all connected inside the pump, so basically you have just one outlet, but you can connect to it from either side of the tractor.

As mkirsch said, you need a 2 spool auxiliary valve.

Janicholson · May 16, 2010

The diagram will do it. If you need two valves, one that is one way and one two way, the second valve must be connected to the return line from the first valve. The second valves return then goes as shown (if you only use a two way, or the return is plumbed into a "T" in the drain at the bottom of the reservoir. If two valves are used, they cannot be operated at the same time, but work well. Jim

h-hyd.question

joemama

New User

mkirsch

Well-known Member

rustyfarmall

Well-known Member

Janicholson

Well-known Member

Similar threads