400 farmall bushing?

t. dowling

New User
Does anyone know where or if I could get a clutch pedal bushing for my farmall 400? I would be happy to have either a source to buy one or if I had the dimensions I would try to get one made.I'm hoping I'm not the only person who's worn theirs out. Thanks
 
The bushing is not listed in the parts illustration; measure the shaft & take the pedal to a machine shop.
Where are you located?
 
I should have checked previous posts BEFORE I posted mine. I'll get a new shaft and have a bushing installed Thanks
 
I have been installing bushing in pedals for a number of years now. I have three different sizes of bushings depending on how wore the old pedal is. I also make a new shaft to fix the old wore out pedal set up. My e-mail is [email protected]
 
(quoted from post at 16:03:13 05/13/10) Does anyone know where or if I could get a clutch pedal bushing for my farmall 400? I would be happy to have either a source to buy one or if I had the dimensions I would try to get one made.I'm hoping I'm not the only person who's worn theirs out. Thanks

Originally there was no bushing, I have had a local machine shop bore and install a bushing in two 400 clutch pedals for me. I supplied a bronze bushing 1.25" OD 1" ID and I think 2" long, they bored the clutch pedal, installed the bushing and then bored the bushing to fit the shaft. I had them make a new shaft too. $60 to sleeve the clutch pedal and $50 for the new shaft.
 
You may find that eBay is a decent place to look for bushings. I recently ordered two bushings for a 350 Utility from Messicks for about $22 for the pair plus (rather expensive) shipping & handling. They called and said the bushings were discontinued and unavailable, so I turned to eBay and got them for $1.97 each; less than $10 delivered.

Mark W. in MI
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top