DT-414 damper installation question

Tbone8

Member
I put new front seals on my 1066. I noticed in the service manual it says to put the damper in boiling water before installing it. I remember putting one back on an 806 and didn't pre-heat it. Do most folks do this prior to re-installing it?
Thanks!
 
It's making the installation easier if its heated. I would coat the lips of new seals with lubri-plate. Hal
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top