Removing clutch on a Super M

PPP · May 8, 2010

Working on changing clutch through bottom hole on a Super M (12 inch clutch). Don't seem to quite be enough room to get the assembly out. I remove drive coupler, spring, clutch cross shaft, compressed pressure plate with 3 - 5/16 bolts, removed pressure plate to flywheel bolts.... Do you have to remove anything on transmission side of coupler? Or is there something special about the angle the shaft has to be in before it will drop out?

Thanks for any help!

pete 23 · May 8, 2010

Pressure plate won't come out of super without splitting, disc will but that will most likely not do what you are intending to do.

PPP · May 8, 2010

Thanks for the information....I was afraid of that. I don't mind splitting an M but this one was painted about six months ago and I did not want to do it.

Thanks again!

Removing clutch on a Super M

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

PPP

New User

pete 23

Well-known Member

PPP

New User

Similar threads