lift all trouble

dan mest

New User
Hi everyone. I have a super m with belly lift all pump. the tractor will not raise our small 6ft claas rotary hay rake. I installed new gauge in the T at output and see 800PSI relief. It will lift the rake halfway as well as our 10ft culti-packer but as soon as all the weight is on the cylinder it wont lift. What is the max weight lift you should see on this unit? Also the pump engage lever has no locked in position feel like an early M pump I checked out. All info always appreciated.
 
*00 is all it will make. If your couiplings are fine, and hoses good, the diameter of the cylinder is too small. (or its leverage on the mower) increasing the diameter by about one third (say from 2" to 2-3/4" should do it. Jim
 
the tractor will raise our big grain dump wagons all the way up, but will only raise our little hay rake half way
 
Amount of pressure is good for the Liftall. The mechanical leverage on the rake is much different than the wagon. The cylinder being smaller is also a factor. Borrow a larger cylinder and see if it works, easy test. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top