Wiring

706 Farmall · Apr 25, 2010

When hooking up the wires on your gnerator, is there a correct post for each wire? How do you know which one goes where? There are two wires.

Bob · Apr 26, 2010

Two of the terminals on the regulator are labeled "GEN" (or "ARM") and "FLD" (or "F").

The two terminals on the generator are labeled "A"/"ARM" and "F"/"FLD"./

Guess WHAT... "GEN"/"ARM"/"A" get connected together and "FLD"/"F" get connected together.

John T · Apr 26, 2010

To add a tidbit to Bobs good advice, in the event the Gennys terminals arent clearly labeled (often stamped in), on many the ARM post is larger then the FLD post. If thats not so and theres no labeling, post back for an ohmmeter method to determine which is which.

John T

706 Farmall · May 1, 2010

There are no markings on the generator.

The posts are the same size.

Please advise, Thanks

Wiring

706 Farmall

Member

Bob

Well-known Member

John T

Well-known Member

706 Farmall

Member

Similar threads