DuAl Front End Loader on FarmAll 560

William Helwig · Apr 21, 2010

I need to have the hydraulic cylinders rebuilt on my DuAl Front End loader on my FarmAll 560 tractor. The information plate with the model # of the Front End Loader is to rusted to easily read the model # It could be 692600, 693600, or 698600
Do any of these model numbers ring a bell with anyone out there?

Leon Torkelson · Apr 21, 2010

If the cylinders have the alumnium end caps like on my Duall loader you would be better off getting diffrent cylinders or a diffrent loader. I tried to rebuild one of the bucket tilt cylinders on my loader but the alumnium end caps would never seal and leaked oil bad. My local hydralic shop told me that the alumnium end caps were to blame. I put diffrent cylinders on it.

mkirsch · Apr 22, 2010

Take the cylinders to a hydraulic shop and have them do it. They'll be able to match parts without knowing jack about your loader.

WOpp · Apr 22, 2010

If it fits a 560 it is more than likly a model # 325 or 345. The cylinders are the same .. Have your local hydralic shop rebuild you"l have no problem. PS If your loader has a single bucket tilt ram it is a model 250. 325 &345 have 2 tilt rams on bucket.

William Helwig · Apr 23, 2010

Thanks to each of you who replied with thoughts and clues. It's been helpful and gets me on my way! Much appreciated.

DuAl Front End Loader on FarmAll 560

William Helwig

New User

Leon Torkelson

Member

mkirsch

Well-known Member

WOpp

Member

William Helwig

New User

Similar threads