FarmAll M pistons and sleeve

David W Moore · Apr 19, 2010

Looking for an Aluminum flat head piston, 3 7/8" bore. Also need a cast iron sleeve both for a 1947 FarmAll M.

Oldiron29 · Apr 19, 2010

David, I just finished a rebuild on a 44' M bought all internals from yesterdays tractor was very happy with product and service. Go to engine
kits on left side of page. Oldiron29

David W Moore · Apr 19, 2010

Thanks for the advice. i wish I started the project here. We tried to salvage as much out of the old engine as possible so we bought rings bearings etc... for the standard 3 7/8" bore. I just need one piston and sleeve and that is becoming a real problem. I may have to go back and buy one of the kits.
thanks,

Oldiron29 · Apr 19, 2010

Dave, Try Bates corp. for used parts or keep an eye on Ebay. You will need a tractor that was never rebuilt or to same size 3 7/8".
Most guy's put super M sleeves and pistons in.
Oldiron 29

nosih · Apr 19, 2010

Did you get my email regarding the NOS IH Aluminum 3 7/8" bore piston & sleeve set?

FarmAll M pistons and sleeve

David W Moore

New User

Oldiron29

Well-known Member

David W Moore

New User

Oldiron29

Well-known Member

nosih

Member

Similar threads