Gary Sedlacek
Member
Call the guy I bought the super c from he said it had a stuck valve in it.I was talking to a guy at he suggested do a compression test and it would tell . If it has a bent valve or help trouble shoot. Thanks Gary
- Thread starter Gary Sedlacek
- Start date
Janicholson
Well-known Member
No compression will sure indicate a problem.
A leak down test is more revealing in tha blowing air into the cylinder (at TDC compression) will blow air out of the leak. Intake , exhaust, head gasket, rings, or hole in the piston. (pulling the valve cover off is also easy). Looking at the valve springs and pushrods define proper valve action. Jim
A leak down test is more revealing in tha blowing air into the cylinder (at TDC compression) will blow air out of the leak. Intake , exhaust, head gasket, rings, or hole in the piston. (pulling the valve cover off is also easy). Looking at the valve springs and pushrods define proper valve action. Jim
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy