After rebuilding the Touch Control on my 100, I finally got to try it out today, with a 4 ft shredder.
No Load -Both arms swing to full rear very quickly, but very slowly to the front.
With a load, whichever arm is hooked to the rear hitch moves slowly to front, and the other arm moves more quickly to the front.
With a load, neither arm lifted the weight of the shredder unless the engine was at almost full throttle.
Any guesses what I don't have correct inside the Touch Control ?
PS - I had put fresh fluid in it, but it was very dark, especially for being only a few hours inside the tractor. It was clean, just much darker than when it was put in.
No Load -Both arms swing to full rear very quickly, but very slowly to the front.
With a load, whichever arm is hooked to the rear hitch moves slowly to front, and the other arm moves more quickly to the front.
With a load, neither arm lifted the weight of the shredder unless the engine was at almost full throttle.
Any guesses what I don't have correct inside the Touch Control ?
PS - I had put fresh fluid in it, but it was very dark, especially for being only a few hours inside the tractor. It was clean, just much darker than when it was put in.
