How do you tell which Fast-Hitch points are on an implement?

Tim(nj) · Mar 25, 2010

Not familiar with fast-hitch stuff. How do you tell the difference between the light points and heavy points?

Janicholson · Mar 25, 2010

The light are about an inch through the bottom of the point notch. The heavy are more like an inch and a half. Jim

Al L. in Wisc. · Mar 25, 2010

Hope this helps; large point arm
fast hitch large point arm

504 · Mar 25, 2010

Small points are 1/4 inch shorter top to bottom, front to rear and side to side are the same.Things like three bottom plows are all big points,8 foot discs are big etc.

Farmallhal · Mar 25, 2010

The smaller points for the Super C and 200 model tractors go into a receiver with a vertical opening of 2 1/2" and the receiver for the larger points have a 3" vertical opening. The points have the same vertical heights as well. I don't know if the thickness is any greater on the large points or not as all my implements are for Super C or 200 tractors. The smaller points can be used in the larger receivers with the addition of 1/2" thick spacer bars placed in the bottom of the receiver which were available from IHC when they supported the tractors and implements. Hope this helps, Hal.

How do you tell which Fast-Hitch points are on an implement?

Tim(nj)

Well-known Member

Janicholson

Well-known Member

Al L. in Wisc.

Well-known Member

504

Well-known Member

Farmallhal

Well-known Member

Similar threads