Any way to tell if 806 was factory no T/A ?

JD720 · Mar 23, 2010

I keep seeing tractors like an 806 advertised as factory no T/A but I think they are mostly ones that they just pulled the lever off of it when the T/A went bad.Is there an easy way to tell if it has a T/A in it or not.From what I remember of these tractors most of them had one in them.

Steven f/AZ · Mar 23, 2010

Should be a suffix on the serial number that stands for factory no TA...

I know of several of the Wheatland models around that were no TA from the factory... haven't even seen a Farmall that way, though.

Owen Aaland · Mar 23, 2010

Suffix S = TA. If there is no S after the model number number then it did not come with a TA.

806man · Mar 23, 2010

For what little I know about those old factory delete "No T/A" 806's is that the last one I had did not have the hole in the hood where the T/A handle would be.

Bill Lisbon · Mar 23, 2010

I have a gas Farmall 806, serial 536 no T/A from factory. There is a large plug in the hood where the T/A handle would be

Larry B 1486 · Mar 23, 2010

The MCV valve is different is one other way to tell. The non TA won't have the plunger on top of the valve and a dump valve. My two 806's and 856 never had TA's. TA was a option

Any way to tell if 806 was factory no T/A ?

JD720

Member

Steven f/AZ

Well-known Member

Owen Aaland

Well-known Member

806man

Member

Bill Lisbon

Member

Larry B 1486

Member

Similar threads