IHC Help ???

SPMN · Mar 18, 2010

I bought a pile of stuff at a salvage auction & there was a 2 point fast hitch draw bar in it---Can you IH experts tell me what it's worth and is there much demand for one?
Thanks
Kent

Paul Shuler · Mar 18, 2010

Yes they are somewhat hard to find. I paid $60 for one about 10 years ago. Mine was for a super C so it had the smaller prongs and not the larger ones for the bigger tractors

SPMN · Mar 18, 2010

Thanks for your reply---I measured it & it's 27 inches center to center on the forks---The flat part where all the holes are is 2 3/4" wide and 3/4" thick---Maybe this will help identify wihch one it is----Thanks again
Kent

Janicholson · Mar 18, 2010

The light Draw bar is about an inch thick bottom of prong to bottom of notch at the notch in the prong.
The heavier large tractor FH bar is about an inch and a half at that spot. They are otherwise very similar. Jim

IHC Help ???

Our Phone System is Down!

Please use the Contact us Form

We are working to resolve the issue ASAP! Thanks for your patience!

SPMN

Member

Paul Shuler

Member

SPMN

Member

Janicholson

Well-known Member

Similar threads