3 point hydraulics

Michael in Mn · Mar 1, 2010

I just installed a after market 3 pt. hitch on my Farmall 460. It has 2 one way cylinders on it. The cylinders each have one short hose coming from the top of the cylinder. Do these two hoses need to go to a valve block and then come out of the block with a single hose that goes to the hydraulic socket? Any help would be appreciated as I have no clue how to hook up these hoses. Thanks

armand tatro · Mar 1, 2010

Take the hose from each cylinder to a pipe "T" than a single hose from the center of the "T" to your hydraulic socket. What kind of hitch did you get? With two one-way cylinders I am thinking you have a corn husker hitch. Please post pictures after you get it mounted. Armand

armand tatro · Mar 1, 2010

Forget to ask if you have a owners manual for your 460. With one-way cylinders on your 3 PTH you will need to make sure the hyd. valve controlling the hitch is set for one way operation. The owners manual will explain how to do this. If you have a 3 valve system the extreme right lever will control the rear remote outlet(coupling). Armand

3 point hydraulics

Michael in Mn

New User

armand tatro

Well-known Member

armand tatro

Well-known Member

Similar threads