350 Utility power steering?

Anonymous-0

Well-known Member
I just bought a 350 utility. I wanted something to run a finish mower (woods RM600) in my small orchard. I think it will work. In looking through the manuals I can't figure out what is going on with the steering. It looks like a power steering unit but there is only on valve control on the hydraulics (right side under seat) with one handle that runs the two point hitch. No lines are going to the steering so if it is power it's not hooked up. I'm guessing the tractor was pieced together from two. From reading this site I know that the steering can be a major problem with this tractor. I can email some pictures if anyone thinks they can tell me what is going on and if I can get the parts to run the power steering. Gary
 
If it has two smaller steel lines running from the reservoir to the front then up into the dash area.
They parallel the primary lines from and to the pump. If it has power steering, these will be easy to spot. On the left side there is a rounded cylinder like part of the casting that is, in fact, the steering cylinder. If these are not there, it has not got PS. (probably missing is the center of the steering wheel which proudly stated Power Steering).
jacksonpowersteering.com is a supplier of good systems to fix yours better than new. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top