Farmall 450 starter solenoid question

Tony_Idaho · Feb 24, 2010

I just need a little help in figuring out what the posts on the starter solenoid mean. Don't know what the "S" and "T" mean. I would really like to connect the correct way.

Thanks Tony

I think the "T" goes to GND, but not really sure

D Slater · Feb 24, 2010

If your 450 is above a certain serial # the Starter button wire goes to S. Other should be a I post and goes to the coil side of the resistor. If its below the serial break there will only be a wire for the S post. Unless tractor was rewired.

Tony_Idaho · Feb 24, 2010

Ahhh... Looking at the new solenoid the "T" is actually an "I"

Thanks

Farmall 450 starter solenoid question

Tony_Idaho

Member

D Slater

Well-known Member

Tony_Idaho

Member

Similar threads