I got it back together today . Tight steering , like it should be .
I decided to fill steering box with grease , steering box shaft was pitted . I talked to the guys at the machine shop , we discussed using a speedi sleeve , at the cost of the sleeve and the extra machine work , I decided to just put in a grease fitting and pump it full. I packed all bearing as I put it back together .
I changed all fluids , the strainer for the hydraulic system was stopped up starving pump for fluid , Screen had a small hole in it after I cleaned it up . I tried to sorder that spot closed , did not work had to make a trip to the Case dealer and buy a new strainer .
Well if it ever dries out I am ready to plow .
STEERING WORKS LIKE IT SHOULD ----
I decided to fill steering box with grease , steering box shaft was pitted . I talked to the guys at the machine shop , we discussed using a speedi sleeve , at the cost of the sleeve and the extra machine work , I decided to just put in a grease fitting and pump it full. I packed all bearing as I put it back together .
I changed all fluids , the strainer for the hydraulic system was stopped up starving pump for fluid , Screen had a small hole in it after I cleaned it up . I tried to sorder that spot closed , did not work had to make a trip to the Case dealer and buy a new strainer .
Well if it ever dries out I am ready to plow .
STEERING WORKS LIKE IT SHOULD ----