IH Sickle Mower Identification

Anonymous-0 · Feb 21, 2010

I have a IH sickle mower, not fast hitch, mounted on a Farmall C. What model is it? I also, have a semi-mounted sickle mower on a Super H. I know the previous owner of the tractor bought the mower new at the same time as the tractor. It looks like I could pull a crusher behind the mower. What model is it? I would like to buy operator manuals for the mowers.

ScottyHOMeY · Feb 21, 2010

The mower on the Super C, if it's mounted to the axle tubes and doesn't have a tailwheel, is either a C-21 or a 24. The 24 is basically a heavier-duty lift than the 21.

I don't know about the one on the H, but somebody'll jump in to help with that.

Dave H (MI) · Feb 21, 2010

If you have a picture or can better describe the H mower I can absolutely help you. Semi-mounted mowers for that tractor can be broken down into those that use a pitman and those that are belt driven. I probably have your mower or at least the manual here if you want to shoot me an e-mail. I have experimented with a lot of makes and models over the years including New Idea, Ford, John Deere and IH. Best to date is the IH pitmanless mowers. Most of those set-up to run the crimper have been belt driven balanced head mowers that I have seen. Really can only think of one time I saw a pitman mower set up that way. Don't see a lot of IH mowers around though.

JimB2 · Feb 21, 2010

Yes, many years ago on our C and SC, we had an IH C-21 6ft cut mower mounted to the rear axles and lifted by a rod connected to hydra touch hydraulic arm.

Jimb

Brownie 450 · Feb 21, 2010

Ours with no tail wheel was belt drive to the pitman---27V was the model.

F-Dean · Feb 21, 2010

IHC made a Model 48 rear-mounted sickle mower without a tail-wheel for H and M. A picture will help.

IH Sickle Mower Identification

Anonymous-0

Well-known Member

ScottyHOMeY

Well-known Member

Dave H (MI)

Well-known Member

JimB2

Well-known Member

Brownie 450

Member

F-Dean

Well-known Member

Similar threads