farmall F14 Hydraulic oil seals

Dave A · Feb 15, 2010

I am working on a 1938 f14 that my dad bought new. I need to replace the liftarm oil seals. I have a IT book that has a diagram but it does not show it to well. The seal on the right side should be easy but the one on the left will require taking all the guts out. Is there anything in there that will fall out and small pieces that can get lost.

Dave Allgire · Feb 15, 2010

Two things to watch out for. DON"T use a chisel, screwdriver, or putty knife to pry the pieces apart. The various pieces are machined pretty closely and could get damaged. The other thing is the vanes and springs in the vane chamber. The springs keep the vanes in contact with the vane chamber wall and when you pull the shaft out they could pop out. And there are actually two seals on each side, back to back. Probably due to the pressure of the pump. I don"t know what that pressure is supposed to be. Hope this helps.

Dave A · Feb 15, 2010

Thanks I will try it tomorrow.

farmall F14 Hydraulic oil seals

Dave A

New User

Dave Allgire

Member

Dave A

New User

Similar threads