farmall c plow parts

burnsg2003 · Feb 2, 2010

I have a 1951 C that has the original 3 bottom pow. The Plow is in great shape but the cutters are shot. Where can I get new cutters. They are not the straight type but more concave. ANy help or suggestions would be appreciated

Randy in NE · Feb 3, 2010

Not to doubt you but I don't think that a C is going to pull 3 bottoms. I have 2-14's and that is all that mine wants and it has the oversized pistons and dyno'd at 22 hp. Glenn Mlnarik in Howells, NE sometimes comes across stuff like this. His number is/was 888-802-5782.

gene bender · Feb 3, 2010

There were several after market coulters available they did a good job of turning under the trash. You need to find another old I=H plow to get the rolling cutters as there just anit any new ones. Do they have one blade ar a big one and a small on on the same shank. Yetters were a good one and pretty popular in those days.

Anonymous-0 · Feb 3, 2010

I also have a Super c 1952 with a 2 point 2/14's plow and its all it wants to pull thank god it has the cheat stick. Those colters you talk of I beleive were called landside or slide coulters.

El Toro · Feb 3, 2010

We had a C I think it was bought in 1950 and it had the 2-bottom moldboard plow. It was a load for it too. I had a Super C with the 2-bottom and it would pull it very easily. We used the H and later on used the 300 for plowing. Hal

gab · Feb 3, 2010

I think something like this is all your gonna pull.

burnsg2003 · Feb 3, 2010

Thanks to all that responded. I made a typo it is only a 2 bottom plow. It is like the one that gab posted. A three bootom plow would be a bit much. I have a super H and a two bottom plow to pull behind it. Ican hardly pull two 14"s.

farmall c plow parts

burnsg2003

Member

Randy in NE

Member

gene bender

Well-known Member

Anonymous-0

Well-known Member

El Toro

Well-known Member

gab

Well-known Member

burnsg2003

Member

Similar threads