Sorry I missed your post. I had the same problem on our Super M. While I had the adapter plate off the bolster, I went ahead a drilled two holes through the adapter plate under the studs holding the radiator. I made the holes the same size as those in the bolster. A hole saw worked great for making the holes. Also, plumbed the radiator drain so that I could empty it. A 45 street elbow with a six ijnch nipple came right through a haole already in the adapter plate. I can now service everythiong on the radiator without having to remove any front end parts. Hope thie helps. Thank you. John Hrinevich
- Thread starter FarmerHR
- Start date
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy